SCOPE OF AIRCRAFT MAINTENANCE ENGINEERING

As per the diagrammatic representation given above, which is based on data, given by CAPA, there is huge demand of Aircraft Maintenance Engineering professionals though out world. As per estimation, in Asia Pacific itself there is a demand of 2,56,000 engineers. If we look at the world over figures, we need 6,48,000 Aircraft Maintenance Engineering personals. These are the demand figures from 2017 to 2036, i.e. approximately 20 years.

Looking at the figures above for Asia Pacific region, even if there is 100 % pass rate, India will produce only 2200 candidates per year, means in 20 years approximately 44000, trained Aircraft Maintenance Engineering personals. India and China among the largest countries in this region will be able to provide approximately 1 lac trained manpower. Other remaining small countries will contribute approximately 25000 trained manpower. Considering all these figures, scope of Aircraft Maintenance Engineering personal is too high in the market.

Indian government’s open sky policy, regional connectivity policy, tax exemptions on MRO industry, is boosting Indian Aviation Industry to achieve laurels in the field. Lot of new Aircrafts are being imported by Airlines, Scheduled operators, Non-Scheduled Operator, and Business house owners. All these factors are increasing the demand of skilled Aircraft Maintenance Engineering personals.

Aircraft Maintenance Engineering personals can apply for jobs in approximately 300 plus companies in India, to mention some of the companies and domain of aviation related companies are as follows:

• BSF, HAL, Taneja Aerospace, Mahendra Aerospace, Civil Aviation Department, DGCA, Scheduled Airlines, Non Scheduled Airlines, Private Airlines, Government Airlines, MRO, AMO, TECHNICAL PUBLICATIONS etc.

About The Aircraft Maintenance Engineering Course

Training for the Aircraft Maintenance Engineering program at SOA has been approved by the DGCA. The license Examination is conducted by the DGCA. The duration of training at the institute is 2 years, phased over four semesters. This 2 Year has 2400 Hrs of planned training out of which 2050 Hrs will be in classrooms and labs, and 350 will be in the actual maintenance environment, i.e at MRO. School of Aeronautics has tied up with Air India, which is India’s largest MRO & Hindustan Aeronautics Limited (HAL TAD Kanpur). Total Aviation Experience requirement to obtain a B 1.1 or B2 license is as per CAR 147 Basic training. For obtaining Aircraft Maintenance Engineering License in B2 category students will have to clear 10 module examinations of DGCA, were as for B1.1 category students will have to clear 11 module examinations of DGCA. School of Aeronautics also provides conversion course from B1.1 to B2 or B2 to B1.1

Different types of Airframe and Airframe Components, Engines and Engine Components, Aircraft Instrument System Components, Radio, and Aircraft electrical equipment in our workshop allow the student to study various theories of Mechanical / Avionics of an aircraft. The reference books, periodicals, aviation magazines and textbooks in our library keep the student abreast of knowledge in the aviation field. In short, SOA provide all facilities to make a student a successful Aircraft Maintenance Engineer.

The course is meant to prepare the students for getting an Aircraft Maintenance Engineer License in various categories which is issued by DGCA after the student has passed the module examination conducted by DGCA.

Eligibility for Admission into Aircraft Maintenance Engineering

The minimum qualification for admission to the course is a pass in

i. 10+2 pre-degree/intermediate or equivalent with Mathematics, Physics, and Chemistry / B.Sc with Maths, Physics & Chemistry.

ii. Diploma in Engineering.

Medical Standards For Admission Into Aircraft Maintenance Engineering

The student will have to produce a medical certificate from a registered medical practitioner with minimum MBBS qualification to certify that he/she has no physical disability and the color vision is normal.

Requirement To Hold A Licence Under Part-66 Aircraft Maintenance Engineering Licence

To be granted authorization to issue certificates of release to service a person must hold a valid Aircraft Maintenance Engineering license issued by Part-66. The minimum age to hold a Part-66 license is 18 years. To certify, the minimum age is 21.

How To be an Aircraft Maintenance Engineer (AME) Under Part-66

Under Part-66 an Aircraft Maintenance Engineering license confirms that the person to whom it refers has met the Part-66 knowledge and experience requirements for any aircraft basic category and aircraft type rating specified in the document.

Types of Aircraft Maintenance Engineering (AME) License

The license is divided broadly between Mechanical and Avionic trade disciplines although given the various technologies and combinations applicable to certain aircraft, the Mechanical license category is further subdivided. In addition, various levels within the license allow the holder to be authorized to perform certain roles within line and/or base maintenance. These reflect different levels of task complexity and are supported by different standards of experience and knowledge. An individual may hold a combination of license categories.

The categories within the Aircraft Maintenance Engineering license are:

• Category A   : Maintenance Certifying Mechanic
• Category B1 : Maintenance Certifying Technician (Mechanical)
• Category B2 : Maintenance Certifying Technician (Avionics)
• Category C   : Base Maintenance Certifying Engineer

Category A of Aircraft Maintenance Engineering (AME) License

Category A is further divided into subcategories as follows:

• A1 : Aeroplanes Turbine
• A2 : Aeroplanes Pisto
• A3 : Helicopters Turbin
• A4 : Helicopters Piston

The experience demonstrated on the application must be relevant to the sub-category of the license being applied for and must satisfy certain criteria in respect of recency.

Experience Requirements

An applicant for a category A license must have completed a prescribed period of Aircraft Maintenance Engineering experience. This experience should include minor scheduled line maintenance and simple defect rectification on operating aircraft. Category A applicants should have at least 2 years of practical maintenance experience in operating aircraft.

Category B1 of Aircraft Maintenance Engineering (AME) License

The B1 license is mechanical-based and permits the holder to issue certificates of release to service following line maintenance, including aircraft structure, power plants, and mechanical and electrical systems. Replacement of avionic line replaceable units requiring simple tests without the use of test equipment to prove their serviceability is also included within the privileges of this licence. 

The B1 license is sub-divided into sub-categories as below:

• B1.1 : Aeroplanes Turbine-Engine
• B1.2 : Aeroplanes Piston-Engines
• B1.3 : Helicopters Turbine-Engine
• B1.4 : Helicopters Piston-Engines

Experience Requirement  Aircraft Maintenance Engineering B1 Category

An applicant for a category B1 license must have completed a prescribed period of aircraft maintenance experience. This experience is to be relevant to the license category required and to the maintenance experience of operating aircraft. This experience should include maintenance on aircraft structure, powerplant, mechanical and electrical systems, and replacement of avionic LRUs requiring simple tests to prove their serviceability. Candidates should have at least 4 years of practical maintenance experience in operating aircraft.

Category B2 of Aircraft Maintenance Engineering License

The B2 license is avionic-based and permits the holder to issue certificates of release to service, following line maintenance on avionic systems. A Category B2 license holder also has a role in base maintenance.

The B2 Aircraft Maintenance Engineering license broadly covers the following areas:

• Instrument Systems
• Automatic Pilot Systems (fixed and rotary wing), including Auto-throttle and Auto-land Systems
• Radio Communication, Navigation and Radar Systems
• Electrical Power Generation and Distribution to Avionic Systems

Experience Requirements For Obtaining Aircraft Maintenance Engineering Licence in B2 Category

An applicant for a category B2 Aircraft Maintenance Engineering license must have completed a prescribed period of aircraft maintenance experience. This experience is relevant to the license category sought and to the maintenance experience of operating aircraft in avionic and electrical systems. Category B2 applicants should have at least 4 years of practical maintenance experience in operating aircraft.

AIRCRAFT MAINTENANCE ENGINEERING MODULES

Aircraft Maintenance Engineering is a 2 years program divided into 4 semesters. All the semester has theoretical and practical classes as per DGCA norms. Every semester will have 40 % theory classes and 60 % practical classes. You, doing Aircraft Maintenance Engineering at the School of Aeronautics, gives you a notch over other college students in respect of PRACTICAL KNOWLEDGE. During these two years, you will undergo specially designed practicals as per industry requirements.

For the students of AME, the first semester is common with all branches of AME, comprising of general engineering subjects, second semester onwards you will have core subjects and program-related subjects. Module 1 and 2, is not applicable in India. List of module subjects for the students of AME in various categories.

• • • Module 3-Electrical Fundamentals.
    • Module 4- Electronic Fundamentals.
    • Module 5- Digital Techniques/Electronic Instrument Systems.
    • Module 6-Materials and Hardware.
    • Module 7A-Maintenance Practices.
    • Module 7B-Maintenance Practices.
    • Module 8-Basic Aerodynamics.
    • Module 9A-Human factors.
    • Module 9B-Human factors.
    • Module 10-Aviation Legislation.
    • Module 11A-Turbine Aeroplane Aerodynamics, Structures and Systems.
    • Module 11B-Piston Aeroplane Aerodynamics, Structures and Systems.
    • Module 12- Helicopter Aerodynamics, Structures and Systems.
    • Module 13-Aircraft Aerodynamics, Structures and Systems.
    • Module 14-Propulsion.
    • Module 15-Gas Turbine Engine.
    • Module 16-Piston Engine.
    • Module 17A-Propeller.
    • Module 17B-Propeller.

AME INFORMATION BROCHURE

Click here to download the brochure.